More actions
System Specifications |
---|
FACP: EST QuickStart QSC FACP Location: Caretaker’s Office? System Type: Single-Stage Conventional System Line Voltage: 120VAC NAC Voltage: 24VFWR System Coding: Temporal Strobes Synchronized: Yes, Genesis Self-Sync Date of last known Upgrade: 2012 Year Opened: 1998 |
St. Martin de Porres High School is a catholic high school located at 410 Yankee Valley Blvd, in Airdrie, Alberta, Canada. The school is part of the Calgary Catholic Separate School District (CCSD). The school was built in 1998, and the fire alarm system was upgraded in 2012.
System Specifications (2012-present)[edit | edit source]
FACP[edit | edit source]
The building is protected by an EST QuickStart QSC conventional fire alarm system. The panel is likely located in the caretaker’s office. The system coding is temporal.
Annunciators[edit | edit source]
There is an EST QSA-2-S annunciator with a QSC-CPU-2 CPU and two SL30 zone annunciation cards in the main entrance vestibule.
Notification Appliances[edit | edit source]
All indoor notification appliances are Edwards “Genesis” G1R-HDVM horn/strobes (red, wall-mount, no marking, set to 15cd).
For outdoor notification, there is an Edwards CS405-7A-T weatherproof remote strobe (red, wall-mount) outside the main entrance.
Initiating Devices[edit | edit source]
Pull Stations[edit | edit source]
All pull stations are Simplex MS-301C conventional single-action pull stations.
Automatic Detection Devices[edit | edit source]
There are Edwards EC30U-3 conventional photoelectric smoke detectors throughout the building.
EOLs[edit | edit source]
There are Simplex 2081-9040C end-of-line resistor plates on all circuits.
System Specifications (1998-2012)[edit | edit source]
Former System Specifications |
---|
FACP: Simplex 4005 FACP Location: Caretaker's Office? System Type: Conventional System Line Voltage: 120VAC NAC Voltage: 24VDC System Coding: Continuous Strobes Synchronized: No Date of last known Upgrade: N/A <br/ Year Installed: 1998 Year Decommissioned: 2012 |
FACP[edit | edit source]
The building was protected by a Simplex 4005 conventional fire alarm system. The panel was likely located in the caretaker’s office. The system coding was likely continuous.
Annunciators[edit | edit source]
There was a Simplex 4602-9102 annunciator in the main entrance vestibule.
Notification Appliances[edit | edit source]
All notification appliances were likely Simplex 4903-9236 horn/strobes (red, wall-mount, 15cd).
Initiating Devices[edit | edit source]
Pull Stations[edit | edit source]
All pull stations were Simplex MS-301C conventional single-action pull stations.
These devices are still in use on the current fire alarm system.
Automatic Detection Devices[edit | edit source]
There were Simplex “TrueAlarm” 4098-9601 conventional photoelectric smoke detectors throughout the building.
EOLs[edit | edit source]
There are Simplex 2081-9040C end-of-line resistor plates on all circuits.