Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Calgary Fire Department Apparatus Spare

From FireAlarmPedia
System Specifications
FACP: Vigilant VS1
FACP Location: Main Entrance
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: No
Date of last known Upgrade: 2021
Year Opened: 2009

The Calgary Fire Department is the fire department service the City of Calgary. This page will cover the apparatus spare storage facility, located at 1755 18 Avenue NE, in Calgary, Alberta, Canada. The building was built in 2009, and the fire alarm system was partially upgraded in 2021.

System Specifications (2021-present)[edit | edit source]

FACP[edit | edit source]

The building is protected by a Vigilant VS1 addressable fire alarm system. The panel is located at the main entrance. The system runs Vigilant’s GSA addressable protocol, and the system coding is temporal.

Notification Appliances[edit | edit source]

All notification appliances are Simplex 2901-9724 motor bells (10” gong) mounted on Wheelock RSSP-24MCW strobe plates (15cd).

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are Vigilant GSA-M270 addressable single-action pull stations.

Automatic Detection Devices[edit | edit source]

None present.

Modules[edit | edit source]

There are Vigilant GSA-CT1 addressable monitor modules supervising the sprinkler system’s tamper and flow switches.
There is a Vigilant GSA-CR addressable relay module for HVAC shutdown.

EOLs[edit | edit source]

There are Simplex 2081-9040C end of line resistor plates on all sprinkler and signal circuits.