Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Calgary Fire Department Station 28

From FireAlarmPedia
System Specifications
FACP: Edwards iO64
FACP Location: Main Entrance Vestibule
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: Yes, Genesis
Date of last known Upgrade: 2021
Year Opened: 1988

The Calgary FIre Department is the fire department for the City of Calgary. This page will cover Station 28, located at 7925 Edgemont Blvd. NW, Calgary, AB. The station was built in 1988, and the fire alarm system was upgraded in 2021.

System Specifications (2021-present)[edit | edit source]

FACP[edit | edit source]

The building is protected by an Edwards iO64 addressable fire alarm system. The panel is located in the main entrance vestibule. The system runs Edwards’ Signature addressable protocol, and the system coding is temporal.

Notification Appliances[edit | edit source]

All notification appliances are Edwards “Genesis” G1R-HDVM horn/strobes (red, wall-mount, no marking, set to 15cd).

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are EST SIGA-270 addressable single-action pull stations.

Automatic Detection Devices[edit | edit source]

There are Edwards SIGA-PD addressable photoelectric smoke detectors in all office areas.

There are Edwards SIGA-HRD addressable 135°F fixed-temperature/rate-of-rise heat detectors in the apparatus bay and mechanical room.

All detectors are mounted on Edwards SIGA-SB bases.

EOLs[edit | edit source]

There are Edwards EOL-P1 end of line resistor plates on all signal circuits.