Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Prince of Peace Manor

From FireAlarmPedia
System Specifications
FACP: Edwards iO1000
FACP Location: Unknown
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: Yes, EST self-sync
Date of last known Upgrade: 2019
Year Opened: 2005

Prince of Peace Manor is a Christian retirement home located at 300 Prince of Peace Way, in Calgary, Alberta, Canada. The building opened in 2005, and the fire alarm system is original except for the main FACP and annunciator.

System Specifications[edit | edit source]

FACP[edit | edit source]

The building is protected by an Edwards iO1000 addressable fire alarm system. The panel location is unknown. The system runs Edwards’ Signature addressable protocol, and the system coding is temporal. This panel was installed in 2019 replacing an Edwards EST2.

Annunciators[edit | edit source]

There is an Edwards RLCD-C annunciator paired with an Edwards RLED24 annunciator in the main entrance vestibule. Both annunciators are mounted in an Edwards RA-ENC2 enclosure.

Notification Appliances[edit | edit source]

Most notification appliances are Edwards MB10-24 motor bells (10” gong) mounted on Edwards 403-5A-R strobe plates (15cd).

The common area washrooms have Edwards “Genesis” G1R-V15 remote strobes (red, wall-mount, no lettering, 15cd) in them.

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are EST SIGA-270 addressable single-action pull stations.

Automatic Detection Devices[edit | edit source]

There are EST SIGA-PS addressable photoelectric smoke detectors throughout the building, mounted on EST SIGA-SB bases. The building is fully sprinklered.

Modules[edit | edit source]

There are EST SIGA-CT1 addressable monitor modules supervising the sprinkler system’s tamper and flow switches.

EOLs[edit | edit source]

There are Edwards EOL-P1 end-of-line resistor plates on all sprinkler and signal circuits.