Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Ed's Bowling

From FireAlarmPedia
System Specifications
FACP: Notifier AFP-400
FACP Location: Unknown
System Type: Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Continuous
Strobes Synchronized: No
Date of last known Upgrade: N/A
Year Opened: 1996

Ed’s Bowling is a bowling alley/arcade located at 8882 170 Street Northwest #2556, in Edmonton, Alberta, Canada. The establishment is attached to West Edmonton Mall. The establishment opened in 1996 as Red’s, became Ed’s Rec Room in 2006, and was renamed Ed’s Bowling in 2016. The fire alarm system is original, and is tied into the mall’s Simplex 4100U system as an addressable point.

System Specifications[edit | edit source]

FACP[edit | edit source]

The building is protected by a Notifier AFP-400 addressable fire alarm system. The panel location is unknown. The system runs Notifier’s CLIP addressable protocol, and the system coding is continuous.

Annunciators[edit | edit source]

There is a Notifier LCD-80 annunciator at the top of the stairs.

Notification Appliances[edit | edit source]

All notification appliances but one are a mix of Wheelock EHS-DL1 horn/strobes (red, wall-mount, 1.5cd) and System Sensor “Multi-Alert” MA/SS-24 sounder/strobes (red, wall-mount, set to 800Hz Continuous). There is one System Sensor MA12/24 remote sounder (red, set to 800Hz) in the lobby. The Simplex 2901-9723 bells in the entrance hallway are not attached to this system.

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are Notifier NFM-950B conventional single-action pull stations, wired to Notifier MMX-101A addressable monitor modules.

Automatic Detection Devices[edit | edit source]

There are Notifier CPX-551A addressable ionization smoke detectors throughout the building, mounted on Notifier BX501 bases.

EOLs[edit | edit source]

There are Notifier EOL-CR end of line resistor plates on all signal circuits.