Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Embassy Suites by Hilton Fort Lauderdale

From FireAlarmPedia
System Specifications
FACP: Edwards EST3
FACP Location: Unknown
System Type: Addressable
System Line Voltage: 120VAC
NAC Voltage: 70.7VRMS (Audible)
24VDC (Visual)
System Coding: Unknown
Strobes Synchronized: Yes, Genesis
Date of last known Upgrade: 2007
Year Opened: 1987

Embassy Suites is a chain of midrange hotels owned by Hilton. The chain is known for their large atriums. This particular hotel is located at 1100 SE 17th Street, in Fort Lauderdale, Florida, USA. The hotel was built in 1987, and was renovated in 2007. The fire alarm system was upgraded as part of the 2007 renovation.

System Specifications (2007-present)[edit | edit source]

Please note that these system details are unconfirmed as little information was available, and some details are likely not accurate. This page should not be used for official purposes. Fire Alarmpedia is not responsible for any issues caused by inaccuracies.

FACP[edit | edit source]

The building is protected by an Edwards EST3 addressable fire alarm system. The panel location is unknown. The system runs Edwards’ Signature addressable protocol, and is equipped with voice evacuation. The messages and/or tones are unknown at this time.

Notification Appliances[edit | edit source]

All audible notification appliances are Edwards 965-1A-4RW remote speakers (white, ceiling-mount, 70V, 4” round).
All visual notification appliances are Edwards “Genesis” G1-VM remote strobes (white, wall-mount, no marking, set to 15cd).

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are EST SIGA-270 addressable single-action pull stations.

Automatic Detection Devices[edit | edit source]

There are EST SIGA-PS addressable photoelectric smoke detectors throughout all common areas, mounted on EST SIGA-SB4 bases.

Modules[edit | edit source]

There are EST SIGA-CT1 addressable monitor modules supervising the sprinkler system’s tamper and flow switches.
There are EST SIGA-CR addressable relay modules serving various purposes.