Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Spring Gardens G1 (City of Calgary)

From FireAlarmPedia
System Specifications
FACP: Mircom FA-1025T
FACP Location: Main Entrance
System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: Yes, Mircom
Date of last known Upgrade: 2010s
Year Opened: 1983?

Spring Gardens is a roads maintenance facility owned and operated by the City of Calgary. The facility is located at 840 32 Avenue NE, in Calgary, Alberta, Canada. This page will cover Building G1, which is… The building was built around 1983, and the fire alarm system was upgraded in the 2010s.

System Specifications (2010s-present)[edit | edit source]

FACP[edit | edit source]

The building is protected by a Mircom FA-1025T conventional fire alarm system. The panel is located at the main entrance. The system coding is temporal.

Notification Appliances[edit | edit source]

All notification appliances are Mircom “Select-a-Horn/Strobe” FHS-340R horn/strobes (red, wall-mount, set to broadband/15cd).

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are Mircom MS-401 conventional single-action pull stations.

Automatic Detection Devices[edit | edit source]

There are FDD CR-135 conventional 135 degree fixed/rate-of-rise heat detectors throughout the building.
The main shop has a System Sensor 5601A conventional 135°F fixed-temperature/rate-of-rise heat detector.
The office has a System Sensor “i3” C2W-BA conventional photoelectric smoke detector.
Some areas have FDD CR-135-EWT explosion-proof conventional 135 degree fixed/rate-of-rise heat detectors.

EOLs[edit | edit source]

There are Mircom MP-300 end of line resistor plates on all circuits.