Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Waldorf Hotel

From FireAlarmPedia
System Specifications
FACP: Edwards 2280
FACP Location: Unknown

System Type:Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage:24VDC

System Coding: Continuous
Date of last known Upgrade: 1980s
Year Opened: c. 1930s

Waldorf Hotel is a 3 story hotel located at 70 Railway Ave, Drumheller, AB, Canada. The system is all partially assumed as only the panel is visible from the windows and the other devices are visible but hard to see. The building was built in 1937, and the fire alarm system was installed in the 1980s.

System Specifications (1980s-present)[edit | edit source]

FACP[edit | edit source]

The hotel is protected by an Edwards 2280 conventional fire alarm system. Not much is known about it, but it was likely installed in the 1980s as it has the later model silkscreen on the door.

Notification Appliances[edit | edit source]

The notification appliances are a mix of Edwards "Durabel" 6100D vibrating bells (6" gong) and Edwards 439D-6AWC vibrating bells (6" gong) likely installed with the panel.

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

Most pull stations are Edwards 274-111 conventional pull stations.

Automatic Detection Devices[edit | edit source]

None noticed.

EOLs[edit | edit source]

There are Edwards EOL-P1 end-of-line resistor plates on all circuits.