Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

6257-6284 Currents Drive NW, Edmonton

From FireAlarmPedia
System Specifications
FACP: Mircom FX-2000
FACP Location: Mechanical Room
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: No
Date of last known Upgrade: N/A
Year Opened: 2012, 2014, 2016

6257-6284 Currents Drive NW is the address of a small shopping plaza in the Currents of Windermere shopping district of Edmonton, Alberta, Canada. The plaza consists of Dollarama, Staples, Wine and Beyond, Petland, Mark’s, Winners & Homesense. The plaza was originally built in 2012, with Staples, Dollarama and Wine and Beyond being the original tenants. The plaza was expanded in 2014 to add Mark’s and Petland, and once again to add Winners & Homesense. The fire alarm system is original.

System Specifications[edit | edit source]

FACP[edit | edit source]

The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel is located in the mechanical room. The system runs Mircom’s CLIP addressable protocol, and the system coding is temporal.

Annunciators[edit | edit source]

There is a Mircom RAX-LCD annunciator paired with a Mircom RAX-1048TZDS annunciator in the Homesense entrance vestibule.
Both annunciators are mounted inside a Mircom BB-1002 enclosure.

Notification Appliances[edit | edit source]

All indoor notification appliances are Mircom “Select-A-Horn/Strobe” FHS-340R horn/strobes (red, wall-mount, set to electromechanical/15cd).
For outdoor notification, there is a Mircom FHS-340R weatherproof horn/strobe (red, wall-mount) outside the mechanical room.

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are Mircom MS-401AD addressable single-action pull stations.

Automatic Detection Devices[edit | edit source]

None noticed.

Modules[edit | edit source]

There are Mircom MIX-M500MA addressable monitor modules supervising the sprinkler system’s tamper and flow switches.
There are System Sensor M500XA isolator modules on the SLC.

EOLs[edit | edit source]

There are Mircom MP-300 end of line resistor plates on all sprinkler and signal circuits.