Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Health Sciences/Jubilee Station

From FireAlarmPedia
System Specifications
FACP: Simplex 4100ES
FACP Location: Unknown
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 70VRMS (audible)
System Coding: 24VDC (visual)
Strobes Synchronized: Yes, SmartSync
Date of last known Upgrade: 2013
Year Opened: 2005

Health Sciences/Jubilee Station is a light rail station located by the Walter C. Mackenzie Health Sciences Centre in Edmonton, AB. It serves both Metro and Capital Lines. The station was originally built in 2005, and had an expansion in 2013 to add a pedway system. There are two fire alarm systems, which were installed in 2013 and 2016 respectively.

System Specifications (Pedway & Majority) (2013-present)[edit | edit source]

FACP[edit | edit source]

The building is protected by a Simplex 4100ES addressable fire alarm system. The panel location is unknown. The system runs Simplex’s IDNet addressable protocol, and is equipped with voice-evacuation. The tones and/or messages are unknown at this time.

Notification Appliances[edit | edit source]

All notification appliances are Simplex “TrueAlert” 4906-9154 speaker/strobes (white, ceiling-mount, set to 15cd).

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are Simplex 4099-9004 addressable single-action pull stations.

Automatic Detection Devices[edit | edit source]

There are Simplex “TrueAlarm” 4098-9714 addressable photoelectric smoke detectors throughout, mounted on Simplex 4098-9792 bases.

Modules[edit | edit source]

There are Simplex 4090-9001 addressable monitor modules supervising the sprinkler system’s tamper and flow switches.

EOLs[edit | edit source]

There are Simplex 2081-9040C end-of-line resistors on the signal and sprinkler circuits.

System Specifications (Additional Coverage) (2016-present)[edit | edit source]

System Specifications
FACP: Simplex 4007ES
FACP Location: Unknown
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC VoltageL 24VDC
System Coding: Temporal
Strobes Synchronized: Yes, SmartSync
Date of last known Upgrade: 2016
Year Opened: 2013

FACP[edit | edit source]

The building is protected by a Simplex 4007ES addressable fire alarm system. The panel location is unknown. The system runs Simplex’s IDNet addressable protocol, and the system coding is temporal.

Annunciators[edit | edit source]

There is a Simplex 4606-9605 LCD annunciator paired with a 4602-9101 LED annunciator in the lobby.

Notification Appliances[edit | edit source]

The only notification appliance is a Simplex “TrueAlert” 4906-9128 horn/strobe (red, ceiling-mount, set to 15cd).

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are Simplex 4099-9004 addressable single-action pull stations.

Automatic Detection Devices[edit | edit source]

There are Simplex 4098-9714 addressable photoelectric smoke detectors mounted on Simplex 4098-9792 bases.

EOLs[edit | edit source]

There are Simplex 2081-9040C end-of-line resistors on the signal circuit.