Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Tillebrook Provincial Park Office

From FireAlarmPedia
System Specifications
FACP: EST FireShield FS302G
FACP Location: Main Entrancee
System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized
Date of System Installation: 2007?
Year Opened: 1969

Tillebrook Provincial Park is a provincial park located on Township Road 183A, in Tilley, Alberta, Canada. The park contains a day use area and five campground loops. This page will cover the park office, which is the only building with a fire alarm system. The building opened in 1969, and the fire alarm system is from 2007.

Note: This fire alarm system is not in use. The system does not have power, and will not detect a fire or warn people.

System Specifications (2007-present)[edit | edit source]

FACP[edit | edit source]

The building is protected by an EST FireShield FS302G conventional fire alarm system. The panel is located next to the main entrance. The system coding is temporal.

Notification Appliances[edit | edit source]

The only notification appliance is an EST “Genesis” G1R-HDVM horn/strobe (red, wall-mount).

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

Both pull stations are Edwards 270-SPO conventional single-action pull stations.

Automatic Detection Devices[edit | edit source]

There are two Edwards EC30U-3 conventional photoelectric smoke detectors in the building.

EOLs[edit | edit source]

There are Edwards EOL-P1 end-of-line resistor plates on all circuits.