Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

1939 30 St SW, Calgary

From FireAlarmPedia
System Specifications
FACP: Mircom FA-1000
FACP Location: Main Entrance
System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: No
Date of last known Upgrade: N/A
Year Opened: 2008

1939 30 St SW is a 3-story apartment building in Killarney/Glengarry, SW Calgary. It was built in 2008, and has its original system. This condominium has no notification appliances in the units.

System Specifications[edit | edit source]

FACP[edit | edit source]

The building is protected by a Mircom FA-1000 conventional fire alarm system. The panel is located at the main entrance. The system coding is temporal.

Notification Appliances[edit | edit source]

All notification appliances are Mircom "Select-A-Horn/Strobe" FHS-240R horn/strobes (red, wall-mount, 15cd). The units have residential smoke alarms in them; there are no notification appliances in the units.

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are Mircom MS-401 conventional single-action pull stations.

Automatic Detection Devices[edit | edit source]

None noticed.

EOLs[edit | edit source]

There are Mircom MP-300 end of line resistor plates on all circuits.