Brentview Tower

System Specifications
FACP: Mircom FX-2000 FACP Location: Main Entrance Vestibule System Type: Single-Stage Addressable System Line Voltage: 120VAC NAC Voltage: 24VFWR System Coding: Temporal Strobes Synchronized: No Date of last known Upgrade: 2015 Year Opened: 1970

Brentview Tower is a 14-story apartment building located at 3524 31 St NW, Calgary, Alberta. It is located adjacent to Boardwalk Retirement Community. It was built in 1970, and the fire alarm system was upgraded in 2005, and then 2015.

System Specifications (2015-present)

FACP

The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel is located in the main entrance vestibule. The system runs Mircom’s CLIP addressable protocol, and the system coding is temporal.

Notification Appliances

All audible notification appliances are Wheelock MB-G10-24 motor bells (10” gong), mounted on Wheelock RSSP-2415W strobe plates (15cd) except for one.
One bell is mounted on an Amseco RSB24-153075 strobe plate (red, set to 75cd) as a deficiency replacement.

Initiating Devices

Pull Stations

All pull stations are Mircom MS-401AD addressable single-action pull stations.

Automatic Detection Devices

There are Mircom MIX-2251APA addressable photoelectric smoke detectors throughout the building.
The garbage chute rooms, mechanical/electrical rooms and other similar areas have Mircom MIX-5251RAPA addressable 135°F fixed/rate-of-rise heat detectors.
All detectors are mounted on System Sensor B210LPA bases.

Modules

There are Mircom MIX-M500RAPA addressable monitor modules supervising the sprinkler system's flow switches.

There are System Sensor M500XA isolator modules on the SLC.

EOLs

There are Mircom MP-300 end of line resistor plates on all sprinkler and signal circuits.