More actions
| System Specifications |
|---|
| FACP: EST ESA2000 FACP Location: Main Office System Type: Conventional System Line Voltage: 120VAC NAC Voltage: 24VFWR System Coding: Continuous Strobes Synchronized: No Date of last known Upgrade: 2000s Year Opened: 1972 |
Lester B. Pearson Catholic High School is a high school located at 2072 Jasmine Crescent, in Ottawa, Ontario, Canada. The school opened in 1972, and the fire alarm system was upgraded between 1993 and 1995.
System Specifications (1990s-present)[edit | edit source]
FACP[edit | edit source]
The building is protected by an EST ESA2000 addressable fire alarm system. The panel is located in the main office. The system coding is continuous.
Annunciators[edit | edit source]
There is an EST annunciator in the main entrance vestibule, model unknown.
Notification Appliances[edit | edit source]
Most notification appliances are EST 792-5A-006 horn/strobes (red, wall-mount, 15cd).
The gymnasium has the aforemention horn/strobes, plus an Edwards 892-2B horn/strobe (red, wall-mount, 1.5cd) and one Edwards “Integrity” 757-5A-T horn/strobe (red, wall-mount, 15cd, self-coded to temporal) as a deficiency replacement.
The changerooms have Edwards 405-5A-T remote strobes (red, wall-mount, 15cd).
Deficiency replacements include:
- System Sensor “SpectrAlert” P2415A horn/strobe (red, wall-mount, 15cd) in a classroom,
- Wheelock NS-24MCW horn/strobe (red, wall-mount, set to 15cd, self-coded to temporal) in another classroom
- Mircom “Select-A-Horn/Strobe” FHS-240R horn/strobe (red, wall-mount, set to 15cd/electromechanical) in the gym equipment room.
Initiating Devices[edit | edit source]
Pull Stations[edit | edit source]
All pull stations but one are Edwards 270-SPO conventional single-action pull stations.
There is a Mircom MS-401 conventional single-action pull station by Stair 5 as a deficiency replacement.
Automatic Detection Devices[edit | edit source]
There are Edwards 6249C conventional ionization smoke detectors throughout the school, and there are Edwards 281C conventional fixed/rate-of-rise heat detectors in some areas.
EOLs[edit | edit source]
There are Edwards EOL-P1 end of line resistor plates on all circuits.