Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Ramada by Wyndham Belleville Harbourview Conference Centre

From FireAlarmPedia
System Specifications
FACP: Mircom FA-1000
FACP Location: Unknown
System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Continuous?
Strobes Synchronized: N/A
Date of last known Upgrade: 2000s
Year Opened: 1971

Ramada is a chain of budget hotels owned by Wyndham. This particular hotel is located at 11 Bay Bridge Road, in Belleville, Ontario, Canada. The hotel was built in 1971, and became a Ramada in 1984. The fire alarm system is partially original.

System Specifications (2000s-present)[edit | edit source]

FACP[edit | edit source]

The building is protected by a Mircom FA-1000 conventional fire alarm system. The panel location is unknown. The system coding is likely continuous.

Annunciators[edit | edit source]

There is a Mircom RAM-1032TZDS annunciator in the main entrance vestibule, mounted in a Mircom BB-1001 enclosure.

Notification Appliances[edit | edit source]

Most notification appliances are Edwards 439D-6AWC vibrating bells (6” gong).
Some areas have Simplex 2901-9723 motor bells (6” gong).

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

Most pull stations are Edwards 270-SPO conventional single-action pull stations.
Some areas have Cincinnati 13525 conventional single-action pull stations.

Automatic Detection Devices[edit | edit source]

There are Edwards C2M-PD conventional photoelectric smoke detectors throughout all common areas.
There are FDD CR-135 conventional 135-degree fixed-temperature/rate-of-rise heat detectors in most guest rooms.
Some guest rooms have Edwards 245A conventional 135-degree fixed-temperature heat detectors.

EOLs[edit | edit source]

There are Edwards EOL-P1 end-of-line resistor plates on all circuits.