Calgary Fire Department Station 14

System Specifications
FACP: Notifier SFP-10UDC FACP Location: Alarm Room System Type: Single-Stage Conventional System Line Voltage: 120VAC NAC Voltage: 24VDC System Coding: Temporal Strobes Synchronized: Yes, System Sensor Date of last known Upgrade: 2019 Year Opened: 1989

The Calgary Fire Department is the fire department serving The City of Calgary. This page will cover Station 14, located at 9840 Horton Road SW, in Calgary, Alberta, Canada. The station was built in 1989, and the fire alarm system was partially upgraded in 2019..

System Specifications (2019-present)

Please note that this system only supervises the fire station, and does not supervise the attached shopping plaza.

FACP

The building is protected by a Notifier SFP-10UDC conventional fire alarm system. The panel is located in the alarm room on the main floor. The system coding is temporal.

Notification Appliances

All notification appliances are System Sensor “L-Series” P2RLA horn/strobes (red, wall-mount, set to 15cd).

Initiating Devices

Pull Stations

All pull stations but one are Simplex 2099-9901 conventional single-action pull stations.
There is a Notifier NFM-950B conventional single-action pull station in the apparatus bay as a deficiency replacement.

Automatic Detection Devices

There are System Sensor C2W-BA conventional photoelectric smoke detectors in most areas.
There are Simplex 4255-51 conventional 135°F fixed-temperature/rate-of-rise heat detectors in some areas.
There are Potter CR-135-EWP conventional 135°F fixed-temperature/rate-of-rise heat detectors in some areas.
There is an FDD CF-200 conventional 200°F fixed-temperature heat detector in the communications room.
There is a System Sensor 5601A conventional 135°F fixed-temperature/rate-of-rise heat detector in one closet.

EOLs

There are Simplex 2081-9018C end of line resistor plates on all circuits.