Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Cochrane Community Health Centre

From FireAlarmPedia
System Specifications
FACP: EST QuickStart QS4
FACP Location: Unknown
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: 20BPM (Alert)
Temporal (Alarm)
Strobes Synchronized: Yes, Self-Sync
Date of last known Upgrade: N/A
Year Opened: 2011

Cochrane Community Health Centre is a medical centre located at 60 Grande Boulevard, in Cochrane, Alberta, Canada. The building opened in 2011, and the fire alarm system is original.

System Specifications[edit | edit source]

FACP[edit | edit source]

The building is protected by an EST QuickStart QS4 addressable fire alarm system. The panel location is unknown. The system runs EST’s Signature addressable protocol, and is configured for two-stage operation. The alert coding is 20BPM, and the alarm coding is temporal.

Annunciators[edit | edit source]

There is an EST QSA-2-S annunciator in the main entrance vestibule.

Notification Appliances[edit | edit source]

All notification appliances are EST “Genesis” G1-HDVM horn/strobes (white, wall-mount, no lettering, set to 15cd). The horn and strobe are coded separately by an EST G1M “Signal Master” module.

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are EST SIGA-270P addressable two-stage single-action pull stations.

Automatic Detection Devices[edit | edit source]

None noticed.

Modules[edit | edit source]

There are EST SIGA-CT1 addressable monitor modules supervising the sprinkler system's tamper and flow switches.

There are EST SIGA-CR addressable relay modules serving various purposes.

EOLs[edit | edit source]

There are Edwards EOL-P1 end of line resistor plates on all sprinkler and signal circuits.