Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Medicine Hat Lodge, Trademark Collection by Wyndham

From FireAlarmPedia
System Specifications
FACP: Simplex 4100ES
FACP Location: Various
System Type: Two-Stage Networked Hybrid-Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: 20BPM (Alert)
Temporal (Alarm)
Strobes Synchronized: No
Date of last known Upgrade: 2018
Year Opened: 1986

The Medicine Hat Lodge is a resort-style hotel located at 1051 Ross Glen Drive SE, in Medicine Hat, Alberta, Canada. The hotel is owned by Wyndham, and is part of the Trademark Collection. The hotel was built in 1986, and was expanded in 2009. The fire alarm system was partially upgraded in 2018.
This system is networked to the Copper Coulee Casino.

System Specifications (2018-present)[edit | edit source]

FACP[edit | edit source]

The building is protected by a Simplex 4120 networked fire alarm system. There are likely 2 nodes on this system, both are Simplex 4100ES hybrid-addressable fire alarm panels. The system runs Simplex’s IDNet addressable protocol, and is configured for two-stage operation. The alert coding is 20BPM, and the alarm coding is likely temporal.
This panel replaced a Simplex 4100U from 2009, which in turn replaced the original Simplex 2001.

Annunciators[edit | edit source]

There is a Simplex 4100 operator interface at the front desk.

Notification Appliances[edit | edit source]

Main Hotel[edit | edit source]

Most notification appliances are Simplex 2901-9330 vibrating bells (6” gong in most areas, 10” gong in basement), mounted behind grilles.
Some areas have Simplex 2901-9723 motor bells (6” gong) as deficiency replacements.
There are no notification appliances in the guest rooms.

South Tower[edit | edit source]

All notification appliances are Mircom “Select-A-Horn/Strobe” FHS-240R horn/strobes (red, wall-mount, set to broadband/15cd).

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

Most pull stations are Simplex 2099-9107C conventional two-stage single-action pull stations.
The south tower and basement have Simplex 4099-9004CA addressable two-stage single-action pull stations.

Automatic Detection Devices[edit | edit source]

North Tower (Floors 1-4)[edit | edit source]

There are Simplex “TrueAlarm” 4098-9601 conventional photoelectric smoke detectors throughout most common areas.
Some areas of the second floor have System Sensor 2151A conventional photoelectric smoke detectors.
The main elevator shafts have FDD CR-135 conventional 135°F fixed-temperature/rate-of-rise heat detectors.

South Tower (All Floors) & North Tower Basement[edit | edit source]

There are Simplex “TrueAlarm” 4098-9714 addressable photoelectric smoke detectors throughout most common areas, mounted on Simplex 4098-9792 bases.

Modules[edit | edit source]

There are Simplex 4090-9116 addressable isolators on all SLCs.

EOLs[edit | edit source]

There are Simplex 2081-9018C end of line resistor plates on all conventional zones and signal circuits.