Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Richmond Square

From FireAlarmPedia
System Specifications
FACP: Mircom FX-2000
FACP Location: GoodLife Entrance
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24FWR
System Coding: Temporal
Strobes Synchronized: Partially
Date of last known Upgrade: 2020
Year Opened: 1978

Richmond Square is a midsized shopping plaza located at 3915 51 Street Southwest, in Calgary, Alberta, Canada. The plaza contains Save-On-Foods, Homesense, and GoodLife Fitness. The plaza opened in 1978, and the fire alarm system was upgraded in the 2000s.
Note: This page does not cover the Canadian Tire store. See that page here: Canadian Tire (Richmond Square).

System Specifications (2000s-present)[edit | edit source]

FACP[edit | edit source]

The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel is located at the GoodLife entrance. The system runs Mircom’s CLIP addressable protocol, and the system coding is temporal.

Annunciators[edit | edit source]

There is a Mircom RAX-LCD annunciator paired with a Mircom RAX-1048TZDS annunciator in the Homesense entrance vestibule. Both annunciators are mounted in a Mircom BB-1002 enclosure.

Notification Appliances[edit | edit source]

GoodLife[edit | edit source]

All notification appliances are System Sensor P2RLA horn/strobes (red, wall-mount, bilingual lettering, set to 15cd).

Homesense[edit | edit source]

All notification appliances are Mircom FHS-400-WW horn/strobes (white, wall-mount, set to 15cd). These were installed in 2020.

Save-On-Foods[edit | edit source]

Not currently known.

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

Homesense has Mircom MS-401AP addressable single-action pull stations. All other areas have Mircom MS-401AD addressable single-action pull stations.

Automatic Detection Devices[edit | edit source]

The building is fully sprinklered, and there are no detectors publicly visible.

Modules[edit | edit source]

There are Mircom MIX-M500MAPA addressable monitor modules supervising the sprinkler system’s tamper and flow switches.

EOLs[edit | edit source]

There are Mircom MP-300 end-of-line resistor plates on all sprinkler and signal circuits.