More actions
| System Specifications |
|---|
| FACP: Simplex 4007ES FACP Location: Home & Pharm. Entrance Vestibule System Type: Single-Stage Addressable System Line Voltage: 120VAC NAC Voltage: 24VDC System Coding: Temporal Strobes Synchronized: Yes, per-NAC Date of last known Upgrade: 2020s Year Opened: 2008 |
Walmart Supercentre is a chain of hypermarkets headquartered in Bentonville, Arkansas, USA. This particular store is located at 2051 Strachan Road SE, in Medicine Hat, Alberta, Canada. The store was built in 2008, and the fire alarm system was partially upgraded in the 2020s.
System Specifications (2020s-present)[edit | edit source]
FACP[edit | edit source]
The building is protected by a Simplex 4007ES addressable fire alarm system. The panel is located in the Home & Pharmacy entrance vestibule. The system runs Simplex’s IDNet addressable protocol, and the system coding is temporal.
Notification Appliances[edit | edit source]
Most notification appliances are Edwards “Genesis” G1R-HDVM horn/strobes (red, wall-mount, no marking, set to 15cd).
There are Edwards G1R-VM remote strobes (red, wall-mount, no marking, set to 15cd) in the washrooms and in the main storefront.
Throughout the store, the devices are mounted on poles, with 2 horn/strobes and 2 remote strobes facing opposite each other.
Initiating Devices[edit | edit source]
Pull Stations[edit | edit source]
All pull stations are Simplex 4099-9004 addressable single-action pull stations.
Automatic Detection Devices[edit | edit source]
None noticed.
Modules[edit | edit source]
There are Simplex 4090-9001 addressable monitor modules supervising the kitchen suppression systems, and the sprinkler system’s tamper and flow switches.
There are Simplex 4090-9002 addressable relay modules serving various purposes.
EOLs[edit | edit source]
There are Edwards EOL-P1 end of line resistor plates on all kitchen suppression, sprinkler and signal circuits.
Former System Specifications (2008-2020s)[edit | edit source]
Please note that all former specifications are assumed, and should not be used for official purposes.
| Former System Specifications |
|---|
| FACP: EST QuickStart QS1 FACP Location: Home & Pharm. Entrance Vestibule System Type: Single-Stage Addressable System Line Voltage: 120VAC NAC Voltage: 24VFWR System Coding: Temporal Strobes Synchronized: Yes, per-NAC Date of last known Upgrade: N/A Year Installed: 2008 Year Decommissioned: 2020s |
FACP[edit | edit source]
The building was protected by an EST QuickStart QS1 addressable fire alarm system. The panel was located in the Home & Pharmacy entrance vestibule. The system ran EST’s Signature addressable protocol, and the system coding was temporal.
Notification Appliances[edit | edit source]
Most notification appliances were Edwards “Genesis” G1R-HDVM horn/strobes (red, wall-mount, no marking, set to 15cd).
There were Edwards G1R-VM remote strobes (red, wall-mount, no marking, set to 15cd) in the washrooms and in the main storefront.
Throughout the store, the devices were mounted on poles, with 2 horn/strobes and 2 remote strobes facing opposite each other.
The notification appliances were not replaced during the 2020s system upgrade.
Initiating Devices[edit | edit source]
Pull Stations[edit | edit source]
All pull stations were EST SIGA-270 addressable single-action pull stations.
Automatic Detection Devices[edit | edit source]
Not known.
Modules[edit | edit source]
There were EST SIGA-CT1 addressable monitor modules supervising the kitchen suppression systems, and the sprinkler system’s tamper and flow switches.
There were EST SIGA-CR addressable relay modules serving various purposes.
EOLs[edit | edit source]
There were Edwards EOL-P1 end of line resistor plates on all kitchen suppression, sprinkler and signal circuits.
These were not replaced during the 2020s system upgrade.