Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Place Beausejour

From FireAlarmPedia
System Specifications
FACP: Notifier AM2020
FACP Location: Main Lobby
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Temporal
Strobes Synchronized: No
Date of last known Upgrade: N/A
Year Opened: 2000

Place Beausejour is a 55+ only apartment building located at 5020 52 Avenue, in Beaumont, Alberta, Canada. The building was built in 2000, and the fire alarm system is original.

System Specifications (2000-present)[edit | edit source]

FACP[edit | edit source]

The building is protected by a Notifier AM2020 addressable fire alarm system. The panel is located in the main lobby. The system runs Notifier’s CLIP addressable protocol, and the system coding is temporal.

Notification Appliances[edit | edit source]

All common areas have System Sensor “SpectrAlert” P2415A horn/strobes (red, wall-mount, 15cd).
All suites have System Sensor S2415WA remote strobes (white, wall-mount, 15cd) and System Sensor PA400SWA silenceable mini-horns (white, wall-mount).

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are Notifier NFM-950B conventional single-action pull stations wired to Notifier MMX-101A addressable monitor modules.

Automatic Detection Devices[edit | edit source]

There are Notifier FSP-851A addressable photoelectric smoke detectors throughout the building..
Some areas have Notifier FSP-751A addressable photoelectric smoke detectors.
All detectors are mounted on Notifier B710LPA bases.

Modules[edit | edit source]

There are Notifier MMX-1A addressable monitor modules supervising the sprinkler system’s tamper and flow switches.

EOLs[edit | edit source]

There are Notifier EOL-CR end-of-line resistor plates on all sprinkler and signal circuits.