Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Safeway (McKenzie)

From FireAlarmPedia
System Specifications
FACP: EST QuickStart QS1

FACP Location: Main Entrance
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage:24VFWR

System Coding: Temporal

Strobes Synchronized: Yes
Date of last known Upgrade: 2018
Year Opened: 2004

Safeway is a grocery store chain in North America. This particular location is located at #100 4915 130 Ave SE in the South Trail Crossing Shopping Centre, but is officially known as the McKenzie location. This particular location was built in 2004, and everything but the panel is original.

System Specifications (2004-present)[edit | edit source]

FACP[edit | edit source]

The store is protected by an EST QuickStart QS1 addressable fire alarm system. The panel is located in the main entrance, and was installed in 2018, replacing the original QuickStart for unknown reasons. The system runs EST's Signature addressable protocol, and the system coding is temporal.

Notification Appliances[edit | edit source]

The notification appliances are all Edwards MB10-24 motor bells (10" gong) on EST "Integrity" 403-5A-R (15cd) strobe plates.

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

The pull stations are the original EST SIGA-270 single-action addressable pull stations.

Automatic Detection Devices[edit | edit source]

Waterflow protection, so no detectors are present.

Modules[edit | edit source]

There are EST SIGA-CT1 addressable monitor modules supervising the sprinkler system's tamper and flow switches.

EOLs[edit | edit source]

There are Edwards EOL-P1 end-of-line resistor plates on all sprinkler and signal circuits.