Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

416 Leach St, Revelstoke

From FireAlarmPedia
System Specifications
FACP: Mircom FA-1025T
FACP Location: Furnace Room
System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal?
Strobes Synchronized: N/A
Date of last known Upgrade: 2010s
Year Opened: 1961

416 Leach Street is the address of a small group home in Revelstoke, British Columbia, Canada. The building was built in 1961, and the fire alarm system was upgraded in the 1980s.

System Specifications (1980s-present)[edit | edit source]

Please note that some system information is unconfirmed. This page should not be used for official purposes.

FACP[edit | edit source]

The building is protected by a Mircom FA-1025T conventional fire alarm system. The panel is located in the furnace room. The system coding is likely temporal.
This panel was installed in the 2000s replacing a Mirtone 7200.

Notification Appliances[edit | edit source]

All notification appliances are Mirtone 74330 vibrating bells (10” gong).

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are Mirtone 73303 conventional single-action pull stations.

Automatic Detection Devices[edit | edit source]

There are System Sensor “i3” C2W-BA conventional photoelectric smoke detectors throughout the building.
There are Mirtone 73340 conventional 135°F fixed-temperature/rate-of-rise heat detectors in areas such as the laundry room and kitchen.
There is a System Sensor 5601A conventional 135°F fixed-temperature/rate-of-rise heat detector as a deficiency replacement.