Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

Bonavista Baptist Church

From FireAlarmPedia
System Specifications
FACP: Mircom FX-2000
FACP Location: Furnace/Electrical Room
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: No
Date of last known Upgrade: 2004
Most Recent Known Modification: N/A
Year Opened: 1977

Bonavista Baptist Church is a church located at 1507 Acadia Dr SE, in Calgary, Alberta, Canada. The building was built in 1977, and the fire alarm system was upgraded in 2004.

System Specifications (2004-present)

FACP

The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel is located in the furnace/electrical room. The system runs Mircom's CLIP addressable protocol, and the system coding is temporal.

Annunciators

There is a Mircom RAX-LCD annunciator at the main entrance, mounted in a Mircom BB-1001 enclosure.

Notification Appliances

All notification appliances are Mircom "Select-A-Horn/Strobe" FHS-240R horn/strobes (red, wall-mount, set to 15cd).

Initiating Devices

Pull Stations

All pull stations are Mircom MS-401AD addressable single-action pull stations.

Automatic Detection Devices

There are Mircom MIX-5251RBA addressable 135°F fixed-temperature/rate-of-rise heat detectors in most rooms.
There are Mircom MIX-1251BA addressable ionization smoke detectors in some rooms and at the top of each stairwell.
All aforementioned detectors are mounted on System Sensor B210LPA bases.
There is an FDD CF-200 conventional 200°F fixed-temperature heat detector in the main floor furnace room, wired to a Mircom MIX-M500MA addressable monitor module.

EOLs

There are Mircom MP-300 end of line resistor plates on all signal circuits.