Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

Burnt Bridge Creek Elementary School

From FireAlarmPedia
System Specifications (Main Bldg)
FACP: Notifier NFS-320
FACP Location: Back Room
System Type: Addressable
System Line Voltage: 120VAC
NAC Voltage: 70.7VRMS (Audible)
24VDC (Visual)
System Coding: Unknown
Strobes Synchronized: Yes, System Sensor
Date of last known Upgrade: 2016
Most Recent Known Modification: N/A
Year Opened: 1988

Burnt Bridge Creek Elementary School is an elementary school located at 14619 NE 49th St, in Vancouver, Washington, USA. The school consists of two buildings; both were built in 1988 and renovated in 2016. The fire alarm systems in both buildings were upgraded as part of the 2016 renovations.

System Specifications (Main Building, 2016-present)

FACP

The building is protected by a Notifier NFS-320 addressable fire alarm system. The panel is located in a back room. The system runs Notifier's FlashScan addressable protocol, and is paired with a Notifier NFV-50/100 voice evacuation system. The evacuation signal is unknown.

Annunciators

There are Notifier FDU-80 annunciators in some areas.

Notification Appliances

Most notification appliances are System Sensor "SpectrAlert Advance" SPSW speaker/strobes (white, wall-mount, set to 70V/15cd).
Some areas have System Sensor SW remote strobes (white, wall-mount, set to 15cd).

Initiating Devices

Pull Stations

All pull stations are Notifier NBG-12LX addressable dual-action pull stations.

Automatic Detection Devices

There are Notifier FSP-851 addressable photoelectric smoke detectors in some areas, mounted on System Sensor B210LP bases.


Former System Specifications (Main Building, 1988-2016)

Former System Specifications (Main Bldg)
FACP: Simplex 4002
FACP Location: Back Room
System Type: Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Continuous
Strobes Synchronized: No
Most Recent Known Modification: N/A
Year Installed: 1988
Year + Reason Decommissioned: 2016, Renovations

FACP

The building was protected by a Simplex 4002 conventional fire alarm system. The panel was located in a back room. The system coding was continuous.

Booster Panels

There were Simplex 4009 booster power supplies on the system.

Notification Appliances

Most notification appliances were Simplex 2901-9838 horns (red) mounted on Simplex 2903-9101 strobe plates (red).
There were Simplex 2904-9101 remote strobes (red) in the main building washrooms.
The portables had Simplex 2901-9838 horns (red) mounted on Simplex 4903-9101 strobe plates.
For outdoor notification, there were Simplex 2901-9840 horns (red) outside the building.

Initiating Devices

Pull Stations

All pull stations were Simplex 4251-20 conventional single-action pull stations.

Automatic Detection Devices

There were Simplex 2098-9636 conventional photoelectric smoke detectors throughout the main building.
There were Simplex 2098-9201 conventional photoelectric smoke detectors in the portables.


System Specifications (Secondary Building, 2016-present)

System Specifications
FACP: Silent Knight 6820
FACP Location: Unknown
System Type: Addressable
System Line Voltage: 120VAC
NAC Voltage: 70.7VRMS (Audible)
24VDC (Visual)
System Coding: Unknown
Strobes Synchronized: Yes, System Sensor
Date of last known Upgrade: 2016
Most Recent Known Modification: N/A
Year Opened: 1988

FACP

The building is protected by a Silent Knight 6820 addressable fire alarm system. The panel location is unknown. The system is equipped with voice evacuation; the evacuation signal is unknown.

Notification Appliances

Most notification appliances are System Sensor "L-Series" SPSWL speaker/strobes (white, wall-mount, set to 70V/15cd).
Some areas have System Sensor SWL-P remote strobes (white, wall-mount, no marking, set to 15cd).

Initiating Devices

Pull Stations

All pull stations are Honeywell SK-PULL-DA addressable dual-action pull stations.

Automatic Detection Devices

There are Silent Knight SK-PHOTO addressable photoelectric smoke detectors throughout the building, mounted on System Sensor B210LP bases.


Former System Specifications (Secondary Building, 1988-2016)

Former System Specifications (Secondary Bldg)
FACP: Simplex 4002
FACP Location: Unknown
System Type: Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Temporal
Strobes Synchronized: No
Most Recent Known Modification: N/A
Year Installed: 1988
Year + Reason Decommissioned: 2016

FACP

The building was protected by a Simplex 4002 conventional fire alarm system. The panel location was unknown. The system coding was temporal.

Booster Panels

There were Simplex 4009 booster power supplies on the system.

Notification Appliances

Most notification appliances were Wheelock AS-24MCW-FR horn/strobes (red, wall-mount, set to 15cd).
Some areas had Wheelock RSS-24MCW-FR remote strobes (red, wall-mount, set to 15cd).

Initiating Devices

Pull Stations

All pull stations were Simplex 4251-20 conventional single-action pull stations.

Automatic Detection Devices

There were Simplex "TrueAlarm" 4098-9601 conventional photoelectric smoke detectors throughout the building.