Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

Mail is now working! Feel free to request an account. Accounts are available to invested enthusiasts/technicians in the industry. :)

Cedarbrae Childcare

From FireAlarmPedia
System Specifications
FACP: Mircom FA-1025A
FACP Location: Main Entrance
System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Continuous
Strobes Synchronized: N/A
Date of last known Upgrade: N/A
Year Opened: 1981

Cederbrae Childcare is a daycare facility located at 11220 26 St SW, in Calgary, Alberta, Canada. The building was built in 1981, and the fire alarm system is mostly original, with pull station replacements occurring in the 1980s, an FACP replacement occurring in the 2000s, detector replacements in the 2010s, and additional replacements as deficiencies occur.

System Specifications

FACP

The building is protected by a Mircom FA-1025A conventional fire alarm system. The panel is located at the main entrance, mounted inside the cabinet of the original Edwards 2280 FACP. The system coding is continuous.

Notification Appliances

All notification appliances are Edwards "Durabel" 6100D vibrating bells (6" gong).

Initiating Devices

Pull Stations

All pull stations but one are Edwards 275-C111 conventional single-action pull stations, replacing Edwards 274-101 pull stations due to a recall.
There is a Summit SPS-101CA conventional single-action pull station in one main floor classroom as a deficiency replacement.

Automatic Detection Devices

There are System Sensor C2W-BA conventional photoelectric smoke detectors throughout most areas.
There are a mix of Edwards 245A conventional 135°F fixed-temperature and FDD CR-135 conventional 135°F fixed-temperature/rate-of-rise heat detectors in all other areas.

EOLs

There are Edwards EOL-P1 end of line resistor plates on all circuits.