Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

CrossIron Mills

From FireAlarmPedia
System Specifications
FACP: Edwards EST3
FACP Location: Security Room by Food Court
System Type: Two-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: 20BPM (Alert)
Temporal (Alarm)
Strobes Synchronized: Yes, EST
Date of last known Upgrade: 2020
Year Opened: 2009

CrossIron Mills is a large outlet mall located at 261055 Crossiron Boulevard, in Rocky View County, Alberta, Canada. The mall is owned by Ivanhoe Cambridge, and has 17 anchor tenants, along with 206 stores and services. The mall was built in 2009, and the fire alarm system is 95% original, with replacement parts being installed as deficiencies occur.

System Specifications (2009-present)[edit | edit source]

FACP[edit | edit source]

The building is protected by an Edwards EST3 addressable fire alarm system. The panel is located in the security office, adjacent to the food court. It was installed around 2020, replacing the original EST3. The system runs EST’s Signature addressable protocol, and is configured for two-stage operation. The alert signal coding is 20BPM, followed by temporal in the alarm signal. The general alarm timer length is five minutes.

Annunciators[edit | edit source]

There is an Edwards EST3-6ANN annunciator in the food court entrance vestibule.

Notification Appliances[edit | edit source]

All notification appliances are from EST's "Integrity" line of products.

Main Mall Corridors[edit | edit source]

The corridors of the mall have EST 757-7A-T horn/strobes (red, wall-mount, 15/75cd), along with EST 757-1A-T remote horns (red, wall-mount). They have a mix of LKC-1 ceiling mount lenses and LKW-1 wall-mount lenses. These are ceiling-mounted.

Tenants[edit | edit source]

The tenants have EST 757-5A-T horn/strobes (red, wall-mount, 15cd). These are wall-mounted.

Winners[edit | edit source]

The notification appliances are EST 757-5A-T horn/strobes, along with 757-1A-T horns for additional audible coverage. These are ceiling-mounted.

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are EST SIGA-270P addressable two-stage single-action pull stations.

Automatic Detection Devices[edit | edit source]

There are EST SIGA-PS addressable photoelectric smoke detectors in some areas, mounted on EST SIGA-SB bases.

Modules[edit | edit source]

There are EST SIGA-CT1 addressable monitor modules supervising the sprinkler system's tamper and flow switches.

There are EST SIGA-CR addressable relay modules serving various purposes.

EOLs[edit | edit source]

There are Edwards EOL-P1 end of line resistor plates on all sprinkler and signal circuits.