Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

Glamorgan Manor Building A

From FireAlarmPedia
System Specifications
FACP: None
System Type: 120V Hardwired
System Line Voltage: 120VAC
System Coding: Continuous
Date of last known Upgrade: N/A
Most Recent Known Modification: N/A
Year Opened: 1970

Glamorgan Manor is an apartment complex owned and operated by Boardwalk. This page will cover Building A, located at 10 Glenway Place SW, in Calgary, Alberta, Canada. The building was built in 1970, and the fire alarm system is original.

System Specifications

The building is protected by a 120VAC hardwired fire alarm system, with bells and initiating devices wired in series-parallel. The system coding is continuous.

Notification Appliances

Most notification appliances are Potter PBA-6-120 vibrating bells (6" gong).
Some areas have Edwards "Durabel" 6000D vibrating bells (6" gong).
There is one Edwards 438D-6N5C vibrating bell (6" gong) on the system.

Initiating Devices

Pull Stations

Most pull stations are Edwards CCS-452 conventional single-action pull stations.
Some areas have Mircom MS-401 conventional single-action pull stations as deficiency replacements.

Automatic Detection Devices

There are a mix of Kidde i12010CA ionization smoke alarms and Kidde P4010ACSCO-CA photoelectric smoke alarms throughout all corridors and at the top of each stairwell, wired to SM-120X relays.
There are two American Sensors ESA5011 ionization smoke alarms on the system.
There are Edwards 245A conventional 135°F fixed-temperature heat detectors in the laundry and maintenance rooms, and in the storage area under the west stairwell.
There is a Mircom TD-135 conventional 135°F fixed-temperature heat detector in the boiler room.
There is an FDD CR-135 conventional 135°F fixed-temperature/rate-of-rise heat detector in the storage area under the east stairwell.