Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Holiday Inn Lethbridge

From FireAlarmPedia
System Specifications
FACP: Edwards iO1000
FACP Location: Main Entrance Vestibule
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Temporal
Strobes Synchronized: Yes, Genesis
Date of last known Upgrade: 2023
Year Opened: 1999

Holiday Inn is a chain of hotels owned by IHG. The chain is headquartered in Denham, England. This particular hotel is located at 2375 Mayor Magrath Drive South, in Lethbridge, Alberta, Canada, and is primarily known for its massive wave pool. The hotel opened in 1999, and was renovated in 2011. The fire alarm system is partially original.

System Specifications (1999-present)[edit | edit source]

FACP[edit | edit source]

The building is protected by an Edwards iO1000 addressable fire alarm system. The panel is located in the main entrance vestibule. The system runs Edwards' Signature addressable protocol, and the system coding is temporal.

The iO1000 replaced the original Edwards EST2 in 2023.

Notification Appliances[edit | edit source]

All hotel common areas have Edwards "Genesis" G1R-HDVM horn/strobes (red, wall-mount, no marking, set to 15cd), some of which are mounted on Edwards G1RT trim plates. These were installed in 2011 with the renovation. The following notification appliances are original.
All guest rooms have General Signal 682-1C mini-horns (white, wall-mount).
Tony Roma's has Edwards "Integrity" 757-1A-T remote horns (red, wall-mount) and Edwards 202-5A-T remote strobes (red, wall-mount, 15cd) mounted together.

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are EST SIGA-270 addressable single-action pull stations.

Automatic Detection Devices[edit | edit source]

There are EST SIGA-PHS addressable photoelectric smoke/135°F fixed-temperature heat detectors throughout all common areas, mounted on EST SIGA-SB bases.

Modules[edit | edit source]

There are EST SIGA-CT1 addressable monitor modules supervising the sprinkler system's tamper and flow switches.

There are EST SIGA-CR addressable relay modules serving various purposes.

EOLs[edit | edit source]

There are Edwards EOL-P1 end of line resistor plates on all sprinkler and signal circuits.