Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

Mail is now working! Feel free to request an account. Accounts are available to invested enthusiasts/technicians in the industry. :)

Mayfair Shopping Centre

From FireAlarmPedia

Mayfair Shopping Centre is a shopping mall located at 3147 Douglas Street, Victoria, British Columbia, Canada. It was originally built in 1963, and was expanded in 1985, 1990 and 2018. The building has two separate fire alarm systems; the 1963-1990 areas were upgraded in the 2000s, and the 2018 expansion has the original fire alarm system. Both systems are wired to trip each other when one goes into alarm.

System Specifications (1963-1990 portions)

System Specifications
FACP: Edwards EST3
FACP Location: South Centre Entrance Vestibule
System Type: Single-Stage Hybrid-Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Temporal
Date of last known Upgrade: 2000s
Most Recent Known Modification: 2010s (pull station)
Year Opened: 1963/1985/1990

FACP

These areas of the building are protected by an Edwards EST3 hybrid-addressable fire alarm system. The panel is located in the south centre entrance vestibule. The system runs Edwards' Signature addressable protocol, and the system coding is likely temporal.

Notification Appliances

All notification appliances are Edwards 439D-10AWC vibrating bells (10" gong).

Initiating Devices

Pull Stations

Most pull stations are Edwards 270-SPO conventional single-action pull stations.
There is a Notifier NFM-950B conventional single-action pull station near H Mart as a deficiency replacement.
There is a Notifier N-MPS-SC conventional single-action pull station in one food court unit.

Automatic Detection Devices

There are EST SIGA-PS addressable photoelectric smoke detectors throughout some areas.
There are EST SIGA-HRS addressable 135°F fixed-temperature/rate-of-rise heat detectors in some areas.
All aforementioned detectors are mounted on EST SIGA-SB bases.
There are EST SIGA-DH duct smoke detector housings equipped with EST SIGA-PS addressable photoelectric heads on all air handling units.

EOLs

There are Edwards EOL-P1 end of line resistor plates on all conventional and signal circuits.

System Specifications (2018 expansion) & Parkade

System Specifications
FACP: Simplex 4100ES
FACP Location: South Entrance Vestibule
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Temporal
Strobes Synchronized: N/A
Date of last known Upgrade: N/A
Most Recent Known Modification: N/A
Year Opened: 2018

FACP

These areas of the building are protected by a Simplex 4100ES addressable fire alarm system. The panel is located in the south entrance vestibule. The system runs Simplex's IDNet addressable protocol, and the system coding is temporal.

Notification Appliances

All notification appliances are Simplex 2901-9724 motor bells (10" gong).

Initiating Devices

Pull Stations

All pull stations are Simplex 4099-9004 addressable single-action pull stations.

Automatic Detection Devices

There are Simplex "TrueAlarm" 4098-9714 addressable photoelectric smoke detectors in all elevator lobbies.
There are Simplex 4098-9733 addressable 135°F fixed-temperature/rate-of-rise heat detectors in some areas.
All aforementioned detectors are mounted on Simplex 4098-9792 bases.
There are Simplex 4098-9755 duct smoke detector housings equipped with Simplex 4098-9714 addressable photoelectric heads on all air handling units.
There is a heat trace system protecting the parkade.

Modules

There are Simplex 4090-9001 addressable monitor modules supervising the heat trace, and the sprinkler system's tamper and flow switches.
There are Simplex 4090-9002 addressable relay modules serving various purposes.
There are Simplex 4090-9116 addressable isolator modules on all SLCs.

EOLs

There are Simplex 2081-9040C end of line resistor plates on all sprinkler and signal circuits.