Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

Mail is now working! Feel free to request an account. Accounts are available to invested enthusiasts/technicians in the industry. :)

Scenic Bow Group Home 20

From FireAlarmPedia
System Specifications
FACP: Mircom FA-1025T
FACP Location: Main Office
System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Continuous
Date of last known Upgrade: 2010s
Year Opened: 1987

Scenic Bow Place is an assisted living facility operated by Alberta Health Services. This page will cover Group Home 20, located at #112 100 Scenic Bow Place NW, in Calgary, Alberta, Canada. The home was built in 1987, and the fire alarm system was upgraded in the 2010s.

System Specifications (2010s-present)

FACP

The building is protected by a Mircom FA-1025T conventional fire alarm system. The panel is located in the main office. The system coding is continuous.

Notification Appliances

All notification appliances are Mircom BL-6B motor bells (6” gong).

Initiating Devices

Pull Stations

There are no pull stations installed in this building.

Automatic Detection Devices

There are System Sensor “i3” C2W-BA conventional photoelectric smoke detectors throughout the building.
Some areas have System Sensor 5601A conventional 135°F fixed-temperature/rate-of-rise heat detectors.
The kitchen has a System Sensor 5603A conventional 135°F fixed-temperature heat detector.
Other areas have FDD CR135 conventional 135°F fixed-temperature/rate-of-rise heat detectors.

Modules

There are Mircom MP-300 end-of-line resistor plates on all circuits.