Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Walmart Supercentre (Wainwright)

From FireAlarmPedia
System Specifications
FACP: Edwards iO1000
FACP Location: Main Entrance Vestibule
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: Yes, Genesis
Date of last known Upgrade: 2022?
Year Opened: 2007

Walmart Supercentre is a chain of hypermarkets headquartered in Bentonville, Arkansas, USA. This particular store is located at 2901 13 Ave, Wainwright, AB. The store opened in 2007, and the fire alarm system is original aside from a panel replacement.

System Specifications (2007-present)[edit | edit source]

FACP[edit | edit source]

The building is protected by an Edwards iO1000 addressable fire alarm system. The panel is located in the main entrance vestibule. The system runs Edwards’ Signature addressable protocol, and the system coding is temporal.
The iO1000 replaced the original EST QuickStart QS1 in the early 2020s.

Power Supplies[edit | edit source]

There is an Edwards BPS10C 10-amp booster panel on the system.

Notification Appliances[edit | edit source]

Most notification appliances are Edwards “Genesis” G1R-HDVM horn/strobes (red, wall-mount, no marking, set to 15cd).
There are Edwards G1R-VM remote strobes (red, wall-mount, no marking, set to 15cd) in the washrooms and in the main storefront.
Throughout the store, the devices are mounted on poles, with 2 horn/strobes and 2 remote strobes facing opposite each other.

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are EST SIGA-270 addressable single-action pull stations.

Automatic Detection Devices[edit | edit source]

None noticed.

Modules[edit | edit source]

There are EST SIGA-CT1 addressable monitor modules supervising the sprinkler system’s tamper and flow switches.
There are EST SIGA-CR addressable relay modules serving various purposes.
There is an EST SIGA-CC1 control module for supervising and triggering the booster panel.

EOLs[edit | edit source]

There are Edwards EOL-P1 end-of-line resistor plates on all sprinkler and signal circuits.