Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

1280-1296 Webber Greens Dr NW, Edmonton

From FireAlarmPedia
System Specifications
FACP: Mircom FX-2000
FACP Location: Mechanical Room
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: No
Date of last known Upgrade: N/A
Year Opened: 2015

1280-1296 Webber Greens Drive NW is the address of a small shopping/dining plaza located in the Webber Greens community of Edmonton, Alberta, Canada. The building consists of Mary Brown’s Chicken, McDonald’s, Posh Hair Studio, Sew Good, and So Posh Nails. The building was built in 2015, and the fire alarm system is original excluding one notification appliance.

System Specifications[edit | edit source]

FACP[edit | edit source]

The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel is located in the mechanical room at the rear of the building. The system runs Mircom’s CLIP addressable protocol, and the system coding is temporal.

Annunciators[edit | edit source]

There is a Mircom RAX-LCD annunciator paired with a Mircom RAX-1048TZDS annunciator outside Mary Brown’s Chicken. Both annunciators are mounted in a Mircom BB-1002 enclosure.

Notification Appliances[edit | edit source]

All indoor notification appliances are Wheelock “Exceder” HSR horn/strobes (red, wall-mount, set to 15cd).
For outdoor notification, there is a Mircom FS-400-WW remote strobe (white, wall-mount) above the annunciator, installed as a deficiency replacement for a Wheelock RSSWP-2475-FR weatherproof remote strobe.

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are Mircom MS-401AD addressable single-action pull stations.

Automatic Detection Devices[edit | edit source]

There are likely Mircom MIX-2251APA addressable photoelectric smoke detectors in some areas, mounted on System Sensor B210LPA bases.

Modules[edit | edit source]

There are Mircom MIX-M500MAPA addressable monitor modules supervising the sprinkler system’s tamper and flow switches.
There are System Sensor M500XA isolator modules on the SLC.

EOLs[edit | edit source]

There are Mircom MP-300 end of line resistor plates on all sprinkler and signal circuits.