More actions
| System Specifications |
|---|
| FACP: Notifier NFS2-640C FACP Location: Main Electrical Room System Type: Single-Stage Addressable System Line Voltage: 120VAC NAC Voltage: 24VDC System Coding: Temporal Strobes Synchronized: Yes, System Sensor Date of last known Upgrade: N/A Most Recent Known Modification: N/A Year Opened: 2012 |
‘’’12800 184 St NW’’’ is the address of an industrial building in Edmonton, Alberta, Canada. The building was built in 2012, and the fire alarm system is original.
System Specifications
FACP
The building is protected by a Notifier NFS2-640C addressable fire alarm system. The panel is located in the main electrical room. The system runs Notifier’s FlashScan addressable protocol, and the system coding is temporal.
Booster Panels
There is a Notifier FCPS-24S8C 8-amp booster power supply next to the main FACP.
Notification Appliances
All indoor notification appliances are System Sensor “SpectrAlert Advance” P2RA horn/strobes (red, wall-mount, set to 15cd).
For outdoor notification, there is a System Sensor SRKA weatherproof remote strobe (red, wall-mount) outside the main electrical room.
Initiating Devices
Pull Stations
All pull stations are Notifier MPS-950B conventional single-action pull stations, wired to Notifier FMM-101A addressable monitor modules.
Automatic Detection Devices
There are Notifier FSI-851A addressable ionization smoke detectors in some areas, mounted on Notifier B710LPA bases.
Modules
There are Notifier FMM-1A addressable monitor modules supervising the fire pump’s run/trouble contacts, and the sprinkler system’s tamper and flow switches.
There are Notifier FRM-1A addressable relay modules serving various purposes.
There are Notifier ISO-XA isolator modules on the SLCs.
EOLs
There are Notifier EOL-CW end of line resistor plates on all sprinkler and signal circuits.