Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

4950 110 Ave SE, Calgary, AB

From FireAlarmPedia
System Specifications
FACP: Mircom FX-2000
FACP Location: All Floors Entrance Vestibule
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: No
Date of last known Upgrade: N/A
Most Recent Known Modification: N/A
Year Opened: 2011

4950 110 Ave SE is the address of a small industrial plaza in Calgary, Alberta, Canada. The plaza consists of All Floors, Dogsail Daycare, and SEGO. The building was built in 2011, and the fire alarm system is original.

System Specifications

FACP

The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel is located in the All Floors entrance vestibule. The system runs Mircom's CLIP addressable protocol, and the system coding is temporal.

Notification Appliances

All notification appliances are Mircom "Select-A-Horn/Strobe" FHS-340W horn/strobes (white, wall-mount, set to electromechanical/15cd).

Initiating Devices

Pull Stations

All pull stations are Mircom MS-401AD addressable single-action pull stations.

Automatic Detection Devices

There are Mircom MIX-2251BA addressable photoelectric smoke detectors at the top of each stairwell.
There are Mircom MIX-5251RBA addressable 135°F fixed-temperature/rate-of-rise heat detectors at the top of the elevator shaft and in the elevator machine room.
All detectors are mounted on System Sensor B210LPA bases.

Modules

There are Mircom MIX-M500MA addressable monitor modules supervising the sprinkler system's tamper and flow switches.

EOLs

There are Mircom MP-300 end of line resistor plates on all sprinkler and signal circuits.