More actions
| System Specifications |
|---|
| FACP: EST QuickStart QSC FACP Location: Main Electrical Room System Type: Single-Stage Conventional System Line Voltage: 120VAC NAC Voltage: 24VFWR System Coding: Temporal Strobes Synchronized: No Date of last known Upgrade: 2000s Most Recent Known Modification: 7/31/2025, H/S Year Opened: 1974 |
Amenida Residences is a hotel located at 4206 Macleod Tr SE, Calgary, Alberta. The building was built in 1974, and the fire alarm system was upgraded in the 2000s.
System Specifications
FACP
The building is protected by an EST QuickStart QSC conventional fire alarm system. The panel is located in the main electrical room. The system coding is temporal.
Annunciators
There is an EST-QSA-1-S annunciator cabinet behind the front desk, with an EST QSC-CPU-1 annunciator and an SL30 zone card.
Notification Appliances
Most notification appliances are Edwards "Genesis" G1R-HDVM horn/strobes (red, wall-mount, no marking, set to 15cd) on G1RT trim plates (red).
There are Mircom "Select-a-Horn" FHS-240R horn/strobes (red, wall-mount, set to 15cd/electromechanical) in some areas.
There are Edwards 692-5A-HSW mini-horn/strobes (white, 15cd) in all handicap room washrooms but one.
Room 144's washroom has a Kidde "Genesis" EG1AVRF horn/strobe (red, wall-mount, set to 75cd) as a deficiency replacement.
Initiating Devices
Pull Stations
Most pull stations are Edwards 270-SPO conventional single-action pull stations.
There are Mircom MS-401 conventional single-action pull stations as deficiency replacement.
There are also Summit SPS-101CA conventional single-action pull stations as deficiency replacements.
Automatic Detection Devices
There are System Sensor C2W-BA conventional photoelectric smoke detectors in most corridors.
Most non-guest rooms, the first floor corridor, and banquet and fitness rooms have System Sensor 5601A conventional 135°F fixed-temperature/rate-of-rise heat detectors.
There are also FDD CR-135 conventional 135°F fixed-temperature/rate-of-rise heat detectors in the mix.
The mechanical rooms have Edwards 245A conventional 135°F fixed-temperature heat detectors.
Some areas have Potter CR-135W conventional 135°F fixed-temperature/rate-of-rise heat detectors.
EOLs
There are Edwards EOL-P1 end-of-line resistor plates on all circuits.