More actions
| System Specifications |
|---|
| FACP: Siemens Desigo Fire Safety Modular FACP Location: Main Lobby System Type: Single-Stage Addressable System Line Voltage: 120VAC NAC Voltage: 24VDC System Coding: Temporal Strobes Synchronized: Yes, System Sensor Date of last known Upgrade: 2022 Year Opened: 2000 |
Bailey Metal Products is a Canadian metal manufacturer. This page will cover the Edmonton branch, located at 5710 Roper Road NW, in Edmonton, Alberta, Canada. The building was built in 2000, and the fire alarm system was upgraded in 2022.
System Specifications (2022-present)
FACP
The building is protected by a Siemens Desigo Fire Safety Modular addressable fire alarm system. The panel is located in the main lobby. The system runs Siemens' FirePrint addressable protocol, and the system coding is temporal.
Booster Panels
There are two Siemens PAD-5 booster power supplies in the warehouse.
Notification Appliances
Most notification appliances are System Sensor "L-Series" P2RLA horn/strobes (red, wall-mount, bilingual lettering, set to 15cd).
All washrooms have System Sensor SRLA remote strobes (red, wall-mount, bilingual lettering, set to 15cd).
For outdoor notification, there is a System Sensor "SpectrAlert Advance" SRKA weatherproof remote strobe (red, wall-mount) outside the main entrance.
Initiating Devices
Pull Stations
All pull stations are Siemens HMS-SA addressable single-action pull stations.
Automatic Detection Devices
There are Siemens FDOOT441 addressable multisensor smoke/heat detectors throughout the office areas, and in all electrical rooms.
There are Siemens FDT421 addressable 135°F fixed-temperature/rate-of-rise heat detectors in all washrooms, change rooms, the lab, and other areas.
All detectors are mounted on Siemens DB-11 bases.
Modules
There are Siemens XTRI-R addressable relay modules serving various purposes.
There are Siemens XTRI-S addressable monitor modules on the SLC, serving as isolator modules.
EOLs
There are Siemens EL-300C end of line resistor plates on all signal circuits.