More actions
| System Specifications |
|---|
| FACP: Notifier SFP-10UD FACP Location: Main Entrance Vestibule System Type: Single-Stage Conventional System Line Voltage: 120VAC NAC Voltage: 24VDC System Coding: Temporal Strobes Synchronized: Yes, System Sensor Date of last known Upgrade: 2023 Most Recent Known Modification: N/A Year Opened: 1996 |
Blowers & Grafton is a chain of Halifax-themed restaurants. This particular restaurant is located at 70 Shawville Blvd SE #500, in Calgary, Alberta, Canada. The building was built in 1996, and was originally a Blockbuster. The building became an iHop in 2013, and became Blowers & Grafton in 2023. The fire alarm system was installed as part of the 2023 conversion; it is unknown if there was a system in the building prior to this time.
System Specifications (2023-present)
Please note that only the locations of automatic detection devices are known; models are assumed based on typical installation patterns for Notifier systems.
FACP
The building is protected by a Notifier SFP-10UD conventional fire alarm system. The panel is located in the main entrance vestibule. The system coding is temporal.
Notification Appliances
All indoor notification appliances are System Sensor "L-Series" P2RLA horn/strobes (red, wall-mount, bilingual lettering, set to 15cd).
For outdoor notification, there is a System Sensor "SpectrAlert Advance" SRKA weatherproof remote strobe (red, wall-mount) outside the main entrance.
Initiating Devices
Pull Stations
All pull stations are Notifier N-MPS-SC conventional single-action pull stations.
Automatic Detection Devices
There are System Sensor 5601A conventional 135°F fixed-temperature/rate-of-rise heat detectors in the beer cooler, mechanical room, and some kitchen areas.
There are System Sensor 5604A conventional 194°F fixed-temperature heat detectors in the kitchen.
There are System Sensor "InnovAir Flex" D2A conventional photoelectric duct smoke detectors on all rooftop units.
The restaurant's kitchen suppression system is connected to the fire alarm system.
EOLs
There are Notifier EOL-CR end of line resistor plates on all circuits.