Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Bow Crow Forestry Services (Main Office)

From FireAlarmPedia
System Specifications
FACP: Notifier CSGL-404
FACP Location: Basement Office Area
System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: No
Date of last known Upgrade: Early 2010s
Year Opened: 1968

Bow Crow Forestry Services is a wildfire and forest service located at 8660 Bearspaw Dam Road NW, Calgary, AB. This page will cover the main building, which was built in 1968 and expanded around 1980. The fire alarm system was installed around 1993, with a notification appliance upgrade around 2012, and parts replaced as deficiencies occur.

System Specifications (1993-present)[edit | edit source]

FACP[edit | edit source]

The building is protected by a Notifier CSGL-404 conventional fire alarm system. The panel is located in the basement office area. The system coding is continuous, but the horn/strobes are self-coded temporal.

Notification Appliances[edit | edit source]

All notification appliances are Mircom “Select-a-Horn/Strobe” FHS-340R horn/strobes (red, wall-mount, set to 15cd/electromechanical)

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

Most pull stations are Edwards 270-SPO conventional single-action pull stations, installed in 1980.
There are also Notifier NFM-950B conventional single-action pull stations installed with the upgrade.
There are Mircom MS-401 conventional single-action pull stations as deficiency replacements.

Automatic Detection Devices[edit | edit source]

There are FDD CR-135 conventional 135॰F fixed-temperature/rate-of-rise heat detectors in most rooms of the building.
Some areas have System Sensor “i3” C2W-BA conventional photoelectric smoke detectors.
There is a System Sensor 1400A conventional ionization smoke detector in one stairwell.

EOLs[edit | edit source]

There are Notifier EOL-CR end-of-line resistor plates on all circuits.