Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Bow Crow Forestry Services (Satellite Office)

From FireAlarmPedia
System Specifications
FACP: EST FireShield FS302G
FACP Location: Main Entrance Vestibule
System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Continuous
Date of last known Upgrade: 2000s
Year Opened: 1968

Bow Crow Forestry Services is a wildfire and forest service located at 8660 Bearspaw Dam Road NW, Calgary, AB. This page will cover the satellite office. The building was built in 1968, and the fire alarm system was upgraded in the late 1990s.

System Specifications (late 1990s-present)[edit | edit source]

FACP[edit | edit source]

The building is protected by an EST FireShield FS302G conventional fire alarm system. The panel is located in the main entrance vestibule. The system coding is continuous.

Notification Appliances[edit | edit source]

The only notification appliance is an Edwards 439D-10AWC vibrating bell (10” gong).

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are Edwards 270-SPO conventional single-action pull stations.

Automatic Detection Devices[edit | edit source]

There are System Sensor “i3” C2W-BA conventional photoelectric smoke detectors throughout the building.
Some areas have Edwards 281C conventional 135॰F fixed-temperature/rate-of-rise heat detectors.

EOLs[edit | edit source]

There are Edwards EOL-P1 end-of-line resistor plates on all circuits.