Brandt Tractor Calgary

System Specifications
FACP: Notifier NFS-640C FACP Location: Office Entrance System Type: Single-Stage Addressable System Line Voltage: 120VAC NAC Voltage: 24VDC System Coding: Temporal Strobes Synchronized: Yes, System Sensor Date of last known Upgrade: 2018 Year Opened: 2002

Brandt Tractor is a construction and agricultural equipment dealer. This particular location is located at 10121 Barlow Trail NE, Calgary, Alberta. The building opened in 2002, and was expanded around 2018. The fire alarm system is mostly original, with new parts installed in the expansion.

System Specifications

FACP

The building is protected by a Notifier NFS-640C addressable fire alarm system. The panel is located in the office entrance. The system runs Notifier’s FlashScan addressable protocol, and the system coding is temporal.

Notification Appliances

Most notification appliances are System Sensor “SpectrAlert” P2415A horn/strobes (red, wall-mount, 15cd).
There is a System Sensor “SpectrAlert Advance” P2RA horn/strobe (red, wall-mount, set to 15cd) in the mechanic’s area as a deficiency replacement.
There are System Sensor “L-Series” P2RLA horn/strobes (red, wall-mount, bilingual marking, set to 15cd/electromechanical) in the renovated showroom.

Initiating Devices

Pull Stations

Most pull stations are Notifier NBG-12LX addressable dual-action pull stations.
Some areas have Notifier MPS-950B conventional single-action pull stations, wired to Notifier FMM-101A addressable monitor modules.
There are some Notifier N-MPS-SA addressable single-action pull stations.

Automatic Detection Devices

There are Notifier FSP-851A addressable photoelectric smoke detectors in the training room and other areas, mounted on Notifier B710LPA bases.

Modules

There are Notifier FMM-1A addressable monitor modules supervising the sprinkler system’s tamper and flow switches.

EOLs

There are Notifier EOL-CR end of line resistor plates on all sprinkler and signal circuits.