More actions
| System Specifications |
|---|
| FACP: Mircom FX-2000 FACP Location: Main Entrance Vestibule System Type: Single-Stage Conventional System Line Voltage: 120VAC NAC Voltage: 24VFWR System Coding: Temporal Strobes Synchronized: Yes, Mircom Date of last known Upgrade: 2015 Most Recent Known Modification: 2010s (Replacement Device) Year Opened: 1998 |
Brewsters Brewing Company is a Canadian chain of breweries and restaurants located in Calgary and Edmonton. This particular restaurant is located at 5519 53 St SE, Calgary, Alberta. The restaurant was built in 1998, added on in 2004 and 2017. The fire alarm system is somewhat original, with a partial upgrade in 2015.
System Specifications (2015-present)
FACP
The building is protected by a Mircom FX-2000 conventional fire alarm system. The panel is located in the main entrance vestibule. The system coding is temporal.
Notification Appliances
All notification appliances are Mircom "Select-a-Horn/Strobe" FHS-340R horn/strobes (red, wall-mount, set to 15cd/electromechanical).
Initiating Devices
Pull Stations
Most pull stations are Edwards 270-SPO conventional single-action pull stations.
There are Mircom MS-401 conventional single-action pull stations in the brewery area except one.
There is one Edwards 270-SPOW conventional single-action pull station on the system.
There is a Secutron MRM-MPG1 conventional single-action pull station in the brewery area as a deficiency replacement.
Automatic Detection Devices
There are Edwards 284C 194°F fixed-temperature heat detectors in the kitchen and brewery areas except one.
Some boiler rooms and the mechanical rooms have System Sensor 5604A conventional 194°F fixed-temperature heat detectors; there is one in the brewery area as a deficiency replacement.
There are Edwards 281B-PL conventional 135°F fixed-temperature/rate-of-rise heat detectors in some rooms on the second floor as well as the lab.
There are System Sensor C2W-BA conventional photoelectric smoke detectors at the top of each stairwell.
Modules
There are two Mircom SDM-240 sync modules synchronizing all horn/strobes.
EOLs
There are Mircom MP-300 end-of-line resistor plates on all circuits.