Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

Mail is now working! Feel free to request an account. Accounts are available to invested enthusiasts/technicians in the industry. :)

Canadian Tire (Sherwood Park South)

From FireAlarmPedia
System Specifications
FACP: Notifier NFS-320C
FACP Location: Unknown
System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Temporal
Strobes Synchronized: Yes, Genesis Self-Sync
Date of last known Upgrade: 2005
Most Recent Known Modification: 2010s, FACP & Duct Smokes
Year Opened: 1990, 2005

Canadian Tire is a Canadian chain of department/automotive stores. This particular store is located at 169 Ordze Road, in Sherwood Park, Alberta, Canada. The store was built in 1990, and was expanded in 2005. The fire alarm system was upgraded in 2005, with an FACP replacement occurring in the 2010s.

System Specifications (2005-present)

FACP

The building is protected by a Notifier NFS-320C conventional fire alarm system. The panel location is unknown. The panel is equipped with several Notifier XP6-MAA zone cards to accommodate the system's conventional devices. The system coding is temporal.

Annunciators

There is a Notifier LCD2-80 annunciator paired with a Notifier ACM-24AT annunciator in the automotive entrance vestibule.

Notification Appliances

All notification appliances are Edwards "Genesis" G1-HDVM horn/strobes (white, wall-mount, no marking, set to 15cd).

Initiating Devices

Pull Stations

All pull stations but one are Edwards 270-SPO conventional single-action pull stations.
There is a Mircom MS-401 conventional single-action pull station by the main entrance as a deficiency replacement.

Automatic Detection Devices

There are System Sensor C2W-BA conventional photoelectric smoke detectors at the top of each stairwell.
There are System Sensor "Innovair Flex" D2A conventional photoelectric duct smoke detectors on all air handling units.

EOLs

There are Edwards EOL-P1 end of line resistor plates on all circuits.