Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

Mail is now working! Feel free to request an account. Accounts are available to invested enthusiasts/technicians in the industry. :)

Cedars of Calgary Building B

From FireAlarmPedia
System Specifications
FACP: Mircom FA-1000
FACP Location: B2 Electrical Room
System Type: Single-Stage Conventional
/>System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: N/A
Date of last known Upgrade: N/A
Most Recent Known Modification: 2010s, FACP
Year Opened: 1977

Cedars of Calgary is an apartment complex located at 215 86 Ave SE, in Calgary, Alberta, Canada. The complex is owned and operated by Shelter Canadian Properties. This page will cover Building B, which was built in 1977. The fire alarm system is original, with replacement parts installed as deficiencies occur.

System Specifications

FACP

The building is protected by a Mircom FA-1000 conventional fire alarm system. The panel is located in the B2 electrical room. The system coding is temporal.
This panel replaced an Edwards 1523.

Annunciators

There is a Mircom RAM-1032TZDS annunciator in the B2 north stairwell, mounted in a Mircom BB-1001 enclosure.

Notification Appliances

All indoor notification appliances are Edwards "Durabel" 6100D vibrating bells (6" gong).
For outdoor notification, there is a Mircom BL-6A motor bell (6" gong) paired with a System Sensor "SpectrAlert Advance" SRKA weatherproof remote strobe (red, wall-mount) outside the B2 entrance.

Initiating Devices

Pull Stations

All pull stations but one are Edwards 270-SPO conventional single-action pull stations.
There is a Mircom MS-401 conventional single-action pull station in one area as a deficiency replacement.

Automatic Detection Devices

There are System Sensor C2W-BA conventional photoelectric smoke detectors throughout all corridors.
There are FDD CF-135 conventional 135°F fixed-temperature heat detectors in all mechanical and electrical rooms, and in all laundry rooms but one.
There is a Mircom 73330 conventional 135°F fixed-temperature heat detector in one laundry room.
There are System Sensor 5601A conventional 135°F fixed-temperature/rate-of-rise heat detectors at the top of each stairwell.

EOLs

All end of line resistors are located in field devices.