Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

Mail is now working! Feel free to request an account. Accounts are available to invested enthusiasts/technicians in the industry. :)

Cedars of Calgary Building C

From FireAlarmPedia
System Specifications
FACP: Mircom FA-1025T
FACP Location: C2 Electrical Room
System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Continuous
Strobes Synchronized: N/A
Date of last known Upgrade: N/A
Most Recent Known Modification: 2010s, Smokes
Year Opened: 1977

Cedars of Calgary is an apartment complex located at 215 86 Ave SE, Calgary, Alberta, Canada. The complex is owned and operated by Shelter Canadian Properties. This page will cover Building C, which was built in 1977. The fire alarm system is mostly original, with devices replaced as deficiencies occur.

System Specifications

FACP

The building is protected by a Mircom FA-1025T conventional fire alarm system. The panel is located in the C2 electrical room. The system coding is continuous.
This panel replaced the original Edwards 1523.

Annunciators

There is a Mircom RA-105 annunciator at the C2 entrance.

Notification Appliances

All indoor notification appliances are Edwards "Durabel" 6100D vibrating bells (6" gong).
For outdoor notification, there is an Edwards "Adaptabel" 343D vibrating bell (6" gong) with a red beacon outside the C2 entrance.

Initiating Devices

Pull Stations

Most pull stations are Edwards 270-SPO conventional single-action pull stations.
Some areas have Mircom MS-401 conventional single-action pull stations as deficiency replacements.

Automatic Detection Devices

There are System Sensor C2W-BA conventional photoelectric smoke detectors throughout the building.
There are System Sensor 5601A conventional 135°F fixed-temperature/rate-of-rise heat detectors at the top of each stairwell.
The laundry, mechanical and electrical rooms have a mix of the following:

  • Mirtone 73330 conventional 135°F fixed-temperature heat detectors
  • Edwards 284C conventional 194°F fixed-temperature heat detectors
  • FDD CR-135 conventional 135°F fixed-temperature/rate-of-rise heat detectors.