More actions
| System Specifications |
|---|
| FACP: Mircom FA-1000 FACP Location: G1 Electrical Room System Type: Single-Stage Conventional System Line Voltage: 120VAC NAC Voltage: 24VFWR System Coding: Temporal Strobes Synchronized: N/A Date of last known Upgrade: N/A Most Recent Known Modification: 2020s, FACP Year Opened: 1977 |
Cedars of Calgary is an apartment complex located at 216 86 Ave SE, in Calgary, Alberta, Canada. The complex is owned and operated by Shelter Canadian Properties. This page will cover Building G, which was built in 1977. The fire alarm system is mostly original, with replacement parts installed as deficiencies occur.
System Specifications
FACP
The building is protected by a Mircom FA-1000 conventional fire alarm system. The panel is located in the G1 electrical room. The system coding is temporal.
Annunciators
There is a Mircom RAM-1032TZDS annunciator at the G1 entrance, mounted in a Mircom BB-1001 enclosure.
Notification Appliances
Most notification appliances are Edwards "Durabel" 6100D vibrating bells (6" gong).
Some areas have Mircom BL-6B motor bells (6" gong) as deficiency replacements.
For outdoor notification, there is a System Sensor "SpectrAlert Advance" SRKA weatherproof remote strobe (red, wall-mount) paired with an Edwards "Adaptabel" 343D vibrating bell (6" gong) outside the G1 entrance.
Initiating Devices
Pull Stations
Most pull stations are Edwards 270-SPO conventional single-action pull stations.
Some areas have Mircom MS-401 conventional single-action pull stations as deficiency replacements.
There is one Summit SPS-101CA conventional single-action pull station as a deficiency replacement.
Automatic Detection Devices
There are System Sensor C2W-BA conventional photoelectric smoke detectors in all corridors.
There are Mirtone 73330 conventional 135°F fixed-temperature heat detectors in all mechanical rooms.
There are Potter CF-135W conventional 135°F fixed-temperature heat detectors in all electrical and laundry rooms.
There are System Sensor 5601A conventional 135°F fixed-temperature/rate-of-rise heat detectors at the top of each stairwell.
EOLs
All end of line resistors are located in field devices.