More actions
| System Specifications |
|---|
| FACP: Notifier NFS-320C FACP Location: Unknown System Type: Single-Stage Addressable System Line Voltage: 120VAC NAC Voltage: 24VDC System Coding: Temporal Strobes Synchronized: Yes, System Sensor Date of last known Upgrade: N/A Year Opened: 2023 |
Churchill Station is a light rail train station in Edmonton, Alberta, Canada. This page will cover the Valley Line building, which serves as a connector between the Valley Line and Metro/Capital Line platforms. The building was built in 2023, and the fire alarm system is original.
System Specifications
FACP
The building is protected by a Notifier NFS-320C addressable fire alarm system. The panel location is unknown. The system runs Notifier’s FlashScan addressable protocol, and the system coding is temporal.
Annunciators
There is a Notifier LCD2-80 annunciator paired with two Notifier ACM-24AT annunciators in the main lobby.
Notification Appliances
Most notification appliances are System Sensor “L-Series” P2RLA-E horn/strobes (red, wall-mount, set to 15cd).
Some areas have System Sensor PC2RLA-E horn/strobes (red, ceiling-mount, set to 15cd).
There are a System Sensor SRLA-E remote strobes (red, wall-mount, set to 15cd) in the Metro/Capital Line building above the doors to this building.
Initiating Devices
Pull Stations
All pull stations are Notifier NBG-12LX addressable dual-action pull stations.
Automatic Detection Devices
There are Notifier FSP-951A addressable photoelectric smoke detectors throughout the building, mounted on System Sensor B300A-6 bases.
Modules
There are Notifier FMM-1A addressable monitor modules supervising the sprinkler system’s tamper and flow switches.
There are Notifier ISO-XA isolator modules on the SLC.
EOLs
There are Notifier EOL-CR end of line resistor plates on all signal circuits.
Accessories
There is a TOA RM-200SF emergency paging microphone next to the annunciator; this microphone is connected to the building’s public address system.