More actions
| System Specifications (Main Building) |
|---|
| FACP: Mircom FX-2000 FACP Location: Rail Shed Electrical Room System Type: Single-Stage Addressable System Line Voltage: 120VAC NAC Voltage: 24VFWR System Coding: Temporal Strobes Synchronized: Yes, System Sensor Date of last known Upgrade: 2018 Most Recent Known Modification: N/A Year Opened: 1956, 2018 |
ClearTech Industries is a Canadian chemical distribution company. This page will cover the Edmonton branch, located at 12720 Inland Way NW, in Edmonton, Alberta, Canada. The branch consists of two buildings: the main building, built in 1956 and expanded in 2018, and the expansion building, built in 2024. The fire alarm system in the main building was upgraded in 2018, while the system in the expansion building is original.
System Specifications (Main Building, 2018-present)
FACP
The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel is located in the rail shed electrical room. The system runs Mircom's CLIP addressable protocol, and the system coding is temporal.
Annunciators
There are Mircom RAX-LCD annunciators paired with RAX-1048TZDS annunciators in the main and rail spur entrance vestibules.
Both sets of annunciators are mounted in Mircom BB-1002 enclosures.
Booster Panels
There are Mircom INX-10A addressable booster power supplies in each electrical room.
Notification Appliances
Most notification appliances are System Sensor "SpectrAlert Advance" P2RA horn/strobes (red, wall-mount, set to 15cd).
There are System Sensor SRA remote strobes (red, wall-mount, set to 15cd) throughout for additional visual coverage.
Initiating Devices
Pull Stations
All pull stations are Mircom MS-401AD addressable single-action pull stations.
Automatic Detection Devices
None present.
Modules
There are Mircom MIX-M500MAPA addressable monitor modules supervising the sprinkler system's tamper and flow switches.
There are Mircom MIX-M500RAPA addressable relay modules serving various purposes.
EOLs
There are Mircom MP-300 end of line resistor plates on all sprinkler and signal circuits.
System Specifications (Expansion Building)
| System Specifications (Expansion Building) |
|---|
| FACP: Mircom FX-2000 FACP Location: Main Electrical Room System Type: Single-Stage Addressable System Line Voltage: 120VAC NAC Voltage: 24VFWR System Coding: Temporal Strobes Synchronized: Yes, Mircom Date of last known Upgrade: N/A Most Recent Known Modification: N/A Year Opened: 2024 |
FACP
The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel is located in the main electrical room. The system runs Mircom's Advanced addressable protocol, and the system coding is temporal.
Notification Appliances
All notification appliances are Mircom FHS-400-RR horn/strobes (red, wall-mount, set to 15cd).
Initiating Devices
Pull Stations
All pull stations are Mircom MS-401AP addressable single-action pull stations.
Automatic Detection Devices
There is a Mircom MIX-2351APA addressable photoelectric smoke detector in the electrical room, and there is a Mircom MIX-5351RAPA addressable 135°F fixed-temperature/rate-of-rise heat detector in the sprinkler room.
Both detectors are mounted on System Sensor B300A-6 bases.
Modules
There are Mircom MIX-M500MAPA addressable monitor modules supervising the sprinkler system's tamper and flow switches.
There are Mircom MIX-M500RAPA addressable relay modules for fan and MUA shutdown.
There are System Sensor M500XA isolator modules on the SLC.
EOLs
There are Mircom MP-300 end of line resistor plates on all sprinkler and signal circuits.