Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

Mail is now working! Feel free to request an account. Accounts are available to invested enthusiasts/technicians in the industry. :)

Earls (Dalhousie)

From FireAlarmPedia
System Specifications
FACP: Simplex 4006
FACP Location: Lobby
System Type: SIngle-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Temporal
Strobes Synchronized: Yes, SmartSync
Date of last known Upgrade: 2012
Year Opened: 1996

Earls is a casual restaurant chain. This particular restaurant is located at #605 5005 Dalhousie Dr NW, Calgary, AB. It was built in 1996, and had a renovation in 2012. The fire alarm system was installed after the renovation, but most of the pull stations are original.

System Specifications (2012-present)

FACP

The building is protected by a Simplex 4006 conventional fire alarm system. The panel is located in the lobby, and is specifically model 4006-9122 (beige door with LED annunciator). The system coding is temporal.

Notification Appliances

All notification appliances are Simplex "TrueAlert" 4906-9127 horn/strobes (red, wall-mount, set to 15cd).

Initiating Devices

Pull Stations

Most pull stations are the original Notifier NFM-950B conventional pull stations. There is a Mircom MS-401 conventional pull station in the kitchen as a deficiency replacement.

Automatic Detection Devices

There is a Simplex 4098-9615 fixed temperature/rate of rise heat detector in the kitchen, and a Simplex 4098-9601 photoelectric smoke detector in the entrance. Both detectors are mounted on 4098-9788 bases.

Former System Specifications (1996-2012)

System Specifications
FACP: Notifier SFP-400B
FACP Location: Lobby
System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Continuous
Strobes Synchronized: No
Date of last known Upgrade: N/A
Year Decomissioned: 2012

FACP

The building was protected by a Notifier SFP-400B conventional fire alarm system. The panel was located in the lobby. The system coding was continuous.

Notification Appliances

All notification appliances were System Sensor MASS24LO sounder/strobes (red, wall-mount, 1.5cd). These were likely set to 800Hz continuous.

Initiating Devices

Pull Stations

All pull stations are Notifier NFM-950B conventional pull stations. These are still installed on the 4006.

Automatic Detection Devices

There were System Sensor 1412A conventional 2-wire ionization smoke detectors, located throughout.