Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

Mail is now working! Feel free to request an account. Accounts are available to invested enthusiasts/technicians in the industry. :)

Flying J (Hope)

From FireAlarmPedia
System Specifications
FACP: Mircom FA-1000
FACP Location: Unknown
System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: Yes, Mircom
Date of last known Upgrade: N/A
Most Recent Known Modification: N/A
Year Opened: 2013

Flying J is a chain of truckstops with locations across North America. This particular facility is located at 63100 Flood-Hope Road, in Hope, British Columbia, Canada. The building was built in 2013, and the fire alarm system is original.

System Specifications

Please note that the FACP information is unconfirmed, and this may be an addressable system. This page should not be used for official purposes.

FACP

The building is protected by a Mircom FA-1000 conventional fire alarm system. The panel location is unknown. The system coding is temporal.

Annunciators

There is a Mircom RAM-1032TZDS annunciator in the main entrance vestibule, mounted in a Mircom BB-1001 enclosure.

Notification Appliances

Most notification appliances are Mircom "Select-A-Horn/Strobe" FHS-340R horn/strobes (red, wall-mount, set to electromechanical/15cd).
The washrooms have Mircom "Select-A-Strobe" FS-340R remote strobes (red, wall-mount, set to 15cd).

Initiating Devices

Pull Stations

All pull stations are Mircom MS-401 conventional single-action pull stations.

Automatic Detection Devices

There are System Sensor C2W-BA conventional photoelectric smoke detectors in some areas.
There are System Sensor "Innovair Flex" D2A conventional photoelectric duct smoke detectors on the Subway rooftop units.

EOLs

There are Mircom MP-300 end of line resistor plates on all circuits.